Ozone Diffuser

ORAIPL is your trusted manufacturer and supplier of Ozone Diffusers for use in various Ozonation systems. We can design, manufacture and supply various types of Ozone Diffusers, based on your requirements. We manufacture Ceramic Dome Diffusers, Rod Diffusers, Fine Bubble Diffusers and Teflon Gaskets for Fine Bubble Ozone Diffusers. Coupled with our wide range of Ozone Generators, these Ozone Diffusers will greatly improve the efficiency of your Ozone treatment system.

Fine Pore Ozone Diffuser for Ozonation

Request Quote Ozone Generator - ORAIPL

Principle of Ozone Diffusion

The efficiency of an Ozonation system depends greatly on the ability of the system to diffuse Ozone in water. This is done by using a diffuser that has very fine pores, so as to create very small bubbles of Ozone that can come in contact with more volume of water, thereby improving the Ozone mixing in water. Usually a stone or ceramic diffuser is placed at the bottom of the water tank, so that the Ozone bubbles can rise up slowly and mix properly with the water.

ORAIPL’s fine-pore ozone diffusers are used specifically for ozone applications. They come in several sizes to accommodate your reaction vessel & flowrate. Glass-bonded diffusers & Kynar (or SS) material ensure long life in ozone rich environments.

Key Features of our Ozone Diffusers
  • Multiple sizes
  • Completely ozone resistant
  • Choose from 1/8″, 3/16″, 1/4″ Kynar barb, or 1/8″ & 1/4″ MPT SS Connections
  • Accommodates flowrates from 0.05-1.0 CFM (higher flowrates available)
  • Easily cleaned with HCl
  • Max pore size – 80 microns
  • Nominal particle retention – 25 microns
  • Flexural strength – 3,500 PSI

Click here to request a FREE QUOTE for our Ozone Diffusers